Photocell-Safety-Barrier-Beam-Sensor

Photocell Safety Barrier Beam Sensor

A safety device that includes a Receive and modulated infrared Transmitter, the self-aligning cell is called a self-aligning Photocell. The Receive is broken by a break in the path of the electrical contact.The function of photocell sensors

1. Use microprocessor control (CPU) to create a digital circuit.

2. Professional waterproof design with rubber seal

3. A single beam sensor/single beam detect is used to control automatic slide doors, coil doors, garage door windows, and so on.

4. It consists of a transmitter, a receiver, as well as an integrated amplifier that can produce an infrared light beam.

SKU: 005 Categories: , , , , , , , , , , , , , ,

Description

Specification for photocell sensors:

Power supply: 12/24V AC/DC

Absorbed current: >25 mA

Sensing range: 15m

Obstacle detection time: 1 sec

Operating temperature: -10°C / 50°C

Type of alignment: Automatic

Installation: wall-mounting

Anti-lightning Digital Filter Circuit Design 12v Barrier Gate Sensor Single Infrared Beam Sensor Abo-20l - Buy Barrier Gate Sensor Single Infrared Beam Sensor,Waterproof Active Photoelectric Single Beam Infrared Sensor Barrier Detector,Barrier Gate

MOUNTING

To ensure maximum efficiency and optimal working performance, align the Transmitter and Receive correctly.

The maximum height for installation should not exceed 20cm. Distance between RX/TX should be at least two meters. The device should be vertically aligned and not on a horizontal line.

Check the alignment of the Receiver’s LEDs. The LED will turn on when the device is in line.

Related products