Automatic Sliding Gate Motor NICE-400kg-600kg-1000kg [Made In ITALY]

For sliding gates  400 kg (RB400), 600 kg (RB600)  1000 kg (RB1000).

Versions with electromechanical limit switch (RB400/RB600/RB1000) and with inductive limit switch (RB400P/RB600P/RB1000P).

User-friendly: the Nice Blue BUS technology, enables to power and control a maximum of seven couples of photocell using two wires only.

Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor.

Advanced: RB400, RB600 and RB1000 are equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronizes two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.

Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.

Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing.

Sturdy: base and release in pressure die cast with easy to open handle.

Very quiet: gear motor on bearings.

 

DOWNLOAD DATA SHEET

Description

Automatic Sliding Gate Motor NICE-400kg-600kg-1000kg [Made in ITALY]

 

CODE DESCRIPTION PACK/PALLET
RB400 IRREVERSIBLE,24V dc, WITH INCORPORATED CONTROL UNIT. WITH ELECTROMECHANICAL LIMIT SWITCH, FOR GATES UP TO 400 kg. 15
RB600 IRREVERSIBLE,24V dc, WITH INCORPORATED CONTROL UNIT. WITH ELECTROMECHANICAL LIMIT SWITCH, FOR GATES UP TO 600 kg. 15
RB600P IRREVERSIBLE,24V dc, WITH INCORPORATED CONTROL UNIT.  WITH INDUCTIVE LIMIT SWITCH, FOR GATES UP TO 600 kg. 15
RB1000 IRREVERSIBLE,24V dc, WITH INCORPORATED CONTROL UNIT. WITH ELECTROMECHANICAL LIMIT SWITCH, FOR GATES UP TO 1000 kg. 15
RB1000P IRREVERSIBLE,24V dc, WITH INCORPORATED CONTROL UNIT. WITH INDUCTIVE LIMIT SWITCH, FOR GATES UP TO 1000 kg. 15

 

TECHNICAL SPECIFICATIONS
CODE RB400 RB6600/6600P RB1000/1000P
ELECTRICAL DATA
POWER SUPPLY 230
ABSORPTION (A) 1.1 2.5 2.3
POWER (W) 250 515 450
PERFORMANCE DATA
SPEED (m/s) 0.34 0.31 0.28
FORCE (N) 400 600 900
WORK CYCLE 35 40 50
DIMENSIONAL AND GENERAL DATA
PROTECTION LEVEL (IP) 44
WORKING TEMP. -20 ÷ +50
DIMENSIONS (mm) 330x195x277 h 330x210x303 h
WEIGHT (kg) 8 11 13